Advertisement
3.5
ROPE SPECIFICATIONS
Accident risk!
Ropes breaking can cause serious accidents.
• Ropes installed in hoist winches must have a minimum breaking load
which is at least three times the pulling force.
• The ropes' safety factors must comply with the standards required for
the equipment and must be observed.
3.5.1
Main Rope
Technical data:
Finished length
Diameter
Characteristics:
Lay and direction
Rotation characteristics
Rope end characteristics
BG 24 H / 2010
TECHNICAL DATA
WARNING!
75 m
28.00 mm
Cross lay, right-hand (SZ)
Low-tension (SPA), non-rotating
Pointed / full thimble bore 60 mm
3 - 6
Advertisement
