Joining Panorama Images In Ring Form; I Playing Back A Panorama Image - Casio Panorama Editor Instruction Manual

Joining panorama images in ring form

You can make a panorama image in a ring form by joining the front (left-hand
edge) to the rear (right-hand edge) image.
This is effective when saving in QuickTime VR format or when scrolling and
playing back on the edit screen.
1.
Select [Edit(E)] → [Form ring(O)].
The left- and right-hand edges of the panorama image being
edited will be joined.
Note:
• If you play back the panorama image in this state, the image will
be scrolled and played back endlessly.
• If you save the image in JPEG format with [Ring setting] on, the
image will not be saved in ring format.

I Playing back a panorama image

This section describes how to play back a panorama image being edited.
You can scroll and play back the panorama image. You can also adjust the
scroll speed.
* Descriptions here assume that a panorama image is displayed in the edit
window.
Important!
Only panorama images saved in CPI format can be played back using
Panorama Editor. Image data saved in other formats should be played back
using an application supporting the particular format.
* Panorama images saved in QuickTime VR format can be played back
using QuickTime.
26