Advertisement
Select the necessary interface type (USB or LAN), enter the
settings for the network connection (IP, port, login) and press
OK key to connect to the power supply. You will see the
connection state in the main program window, "Connection
state" block.
In case of successful connection the program will remember
the settings and next time it will try to use them to reconnect
to the device.
To restore the connection break in the program operation click
"Connect" button in the main window. Also use this window to
record the network settings to the power supply memory. To
do this open "Connection" window after the device connection
via USB, enter the necessary settings in IP, port, login fields and
click "Write LAN options to power supply." When recording you
will need to enter a password. See Pic 3.
To change the password check box "Replace password to new".
11
Pic 2
Pic 3
www.tmatlantic.com
Advertisement
