Specifications; City Code Table - Casio Pathfinder PAW1500 Operation Manual

Operation Guide 3134 3205
3. Use A (+) and C (–) to set the calibration value in the units shown below.
Temperature 0.1°C (0.2°F)
Barometric Pressure 1 hPa (0.05 inHg)
• "OFF" is displayed while the reference temperature value and barometric
pressure value are zero (0).
• Pressing A and C at the same time returns to the factory calibration
(OFF).
4. Press E to return to the Barometer/Thermometer Mode screen.
To select the temperature, barometric pressure, and altitude units
1. Enter the Timekeeping Mode.
2. Hold down E until the city code starts to
flash, which indicates the setting screen.
3. Use D to select the setting screen for the unit
you want to change.
• See step 3 under "To set the time and date
manually" for information about how to scroll
through setting screens.
4. Press A to change the unit setting.
• Each press of A changes the selected unit setting as shown below.
Temperature °C and °F
Altitude m and ft
Barometric Pressure hPa and inHg
5. After the settings are the way you want, press E to exit the setting screen.

Specifications

Accuracy at normal temperature: ±20 seconds a month (with no signal
calibration)
Timekeeping: Hour, minute, second, p.m. (P), month, day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year
2000 to 2099
Other: 2 display formats (Day of the Week, Barometric Pressure Graph);
Home City code (can be assigned one of 33 city codes); Standard
Time / Daylight Saving Time (summer time)
Time Calibration Signal Reception: Auto receive 6 times a day (Remaining
auto receives cancelled as soon as one is successful); Manual
receive; Receive Mode
Receivable Time Calibration Signals: Mainflingen, Germany (Call Sign:
DCF77, Frequency: 77.5 kHz); Anthorn, England (Call Sign: MSF,
Frequency: 60.0 kHz); Fort Collins, Colorado, the United States (Call
Sign: WWVB, Frequency: 60.0 kHz); Fukushima, Japan (Call Sign:
JJY, Frequency: 40.0 kHz); Fukuoka/Saga, Japan (Call Sign: JJY,
Frequency: 60.0 kHz)
Digital Compass: 20 seconds continuous measurement; 16 directions;
Angle value 0° to 359°; Four direction pointers; Calibration
(bidirectional, northerly); Magnetic declination correction
Barometer:
Measurement and display range:
260 to 1,100 hPa (or 7.65 to 32.45 inHg)
Display unit: 1 hPa (or 0.05 inHg)
Measurement timing: Daily from midnight, at two hour intervals (12 times
per day); Every five seconds in the Barometer/Thermometer Mode
Other: Calibration; Manual measurement (button operation); Barometric
pressure graph
Thermometer:
Measurement and display range: –10.0 to 60.0°C (or 14.0 to 140.0°F)
Display unit: 0.1°C (or 0.2°F)
Measurement timing: Every five seconds in the Barometer/Thermometer
Mode
Other: Calibration; Manual measurement (button operation)
Altimeter:
Measurement range: –700 to 10,000 m (or –2,300 to 32,800 ft.) without
reference altitude
Display range: –10,000 to 10,000 m (or –32,800 to 32,800 ft.)
Negative values can be caused by readings produced based on a
reference altitude or due to atmospheric conditions.
Display unit: 5 m (or 20 ft.)
Current Altitude Data: 5-second interval for first 3 minutes followed by 2-
minute interval for next 9 or 10 hours
Altitude Memory Data: 24 altitude records and one high altitude record
Altitude records: Pressing a button records the current altitude value,
along with the date (month-day) of the reading.
High altitude record: Automatically records the highest altitude value
measured in the Altimeter Mode to date, along with the date (month-
day) of the reading.
Other: Reference altitude setting; Altitude graph
Bearing Sensor Precision:
Direction: Within ±10°
Values are guaranteed for a temperature range of – 10°C to 40°C (14°F
to 104°F).
North pointer: Within ±2 digital segments
Pressure Sensor Precision:
Conditions
(Altitude)
± (altitude differential × 3%
Fixed 0 to 6000 m
tempera- 0 to 19680 ft. + 30 m) m
± (altitude differential × 3%
ture
+ 100 ft.) ft.
± (altitude differential × 3%
6000 to 10000 m
19680 to 32800 ft. + 45 m) m
± (altitude differential × 3%
+ 150 ft.) ft.
Effect of 0 to 6000 m ± 80 m every 10°C
variable 0 to 19680 ft. ± 264 ft. every 50°F
tempera-
6000 to 10000 m ± 120 m every 10°C
ture
19680 to 32800 ft. ± 396 ft. every 50°F
• Values are guaranteed for a temperature range of –10°C to 40°C (14°F to
104°F).
• Precision is lessened by strong impact to either the watch or the sensor,
and by temperature extremes.
Temperature Sensor Precision:
±2°C (±3.6°F) in range of –10°C to 60°C (14.0°F to 140.0°F)
Tide/Moon Data:
Moon phase indicator for specific date; Tide level for specific date and time
Other: High tide time adjustment; Moon phase reversal
Countdown Timer:
Measuring unit: 1 second
Countdown range: 60 minutes
Setting ranges: Countdown start time (1 to 60 minutes, 1-minute increments);
Reset time (1 to 5 minutes, 1-minute increments)
Other: Progress beeper
Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 23:59' 59.99''
Measuring modes: Elapsed time, split time, two finishes
Alarms: 5 Daily alarms; Hourly time signal
World Time: 33 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Illumination: EL Backlight (electro-luminescent panel); Auto Light Switch
(Full Auto EL Light operates only in the dark)
Other: Battery power indicator; Power Saving; Low-temperature resistance
(–10°C/14°F); Button operation tone on/off
Power Supply: Solar cell and one rechargeable battery
Approximate battery operating time: 5 months (from full charge to
Level 4) under the following conditions:
• Watch not exposed to light
• Internal timekeeping
• Display on 18 hours per day, sleep state 6 hours per day
• 1 illumination operation (1.5 seconds) per day
• 10 seconds of alarm operation per day
• 10 digital compass operations per week
• 10 hours of altimeter measurement at 2-minutes interval, once per month
• 2 hours of barometric pressure measurement per day
• 6 minutes of signal reception per day
Frequent use of illumination runs down the battery. Particular care is
required when using the auto light switch.
20 months when the watch is left in the sleep state (display off) after a
full charge.

City Code Table

City UTC Offset/
City
Code GMT Differential
PPG Pago Pago –11
HNL Honolulu –10
ANC Anchorage –9
LAX Los Angeles –8
DEN Denver –7
CHI Chicago –6
NYC New York –5
CCS* Caracas –4
RIO Rio De Janeiro –3
Fernando de
–2
FEN
Noronha
RAI Praia –1
UTC –
LON London 0
PAR Paris
+1
BER Berlin
ATH Athens
CAI Cairo +2
JRS Jerusalem
• Based on data as of June 2009.
• The rules governing global times (GMT differential and UTC offset) and
summer time are determined by each individual country.
* In December 2007, Venezuela changed its offset from –4.0 to –4.5. Note
however, that this watch displays an offset of –4.0 (the old offset) for the
CCS (Caracas, Venezuela) city code.
Altimeter Barometer
± (pressure differential × 3%
+ 3 hPa) hPa
± (pressure differential × 3%
+ 0.0885 inHg) inHg
± 6 hPa every 10°C
± 0.177 inHg every 50°F
City UTC Offset/
City
Code GMT Differential
JED Jeddah +3
THR Tehran +3.5
DXB Dubai +4
KBL Kabul +4.5
KHI Karachi +5
DEL Delhi +5.5
DAC Dhaka +6
RGN Yangon +6.5
BKK Bangkok +7
HKG Hong Kong +8
SEL Seoul
+9
TYO Tokyo
ADL Adelaide +9.5
SYD Sydney +10
NOU Noumea +11
WLG Wellington +12
15