Dynello Rewinder II Quick Start Manual

RS0102 Dynello Rewinder II

BEST PRACTICE

Read instruction before use
•
Only use the power tool for the purpose as described in the accom-
panying manual.
Always follow recommendations for use
•
Recommended use: Rewinding of 20 straps, 5 min. pause.
•
Always make sure that the cargo strap is assembled so that the
hook of the cargo strap cannot grasp surrounding objects.
•
When rewinding, pay attention to the hook on the cargo strap and
slow down the winding speed as the hook approaches the power
tool.
Never overload the power tool
•
Always rewind up directly (vertically) to facilitate rewinding. Do not
drag the cargo strap on the ground or over goods during rewinding.
The hook may risk grabbing surrounding objects and overloading
the power tool.
•
Avoid rewinding very twisted cargo straps. It unnecessarily
overloads the power tool and the power tool consumes unneces-
sarily extra power. In the worst case, it can cause damage to the
electric motor.

Storage of power tools

•
After use, always make sure the power tool is kept dry.
•
After use in the muddy and salty (near port) environments, wipe the
power tool with a clean cloth.
•
When rewinding dirty cargo straps, wipe the power tool with a clean
cloth.
250120-2 1 / 2