Dynello Rewinder II Instructions

RS0102 Dynello Rewinder II
Please read the following instructions for maintaining your product to extend its
service life and achieve optimum performance.
NB! Images in this instruction may differ from your product.
Maintenance DURING USE
•
Only use the product for the purpose as described in the accompanying manual.
•
Recommended use: Rewinding 20 cargo straps, 5 min. pause.
•
Do not hold the switch down after end of rewinding. This may result in overload of the power tool and risk of damage to the power tool
and / or personal injury.
•
Only use the power tool in the immediate vicinity of the cargo strap. It can cause personal injury if control of the cargo strap is lost.
•
Only use the power tool if the cargo strap you wish to roll up is collected and unified. It can cause personal injury if control of the
cargo strap is lost.
•
Do not drag the cargo strap on the ground with the power tool during rewinding. This may cause overload of the power tool and risk
of damage to the power tool and / or personal injury.
•
Do not drag the cargo strap off the goods with the power tool during rewinding. This may cause overload of the power tool and risk
of damage to the power tool and / or personal injury.
•
Always point the power tool towards the cargo strap while rewinding. It can cause overload of the power tool and risk of damage to
the power tool if the power tool is unnecessarily overloaded.
250120-2 1 / 3