Debugging Guide - Joy Sport Relax 2010 User Manual

When the machine runs, press this key, the speed will become fast; in setup state,
press this key, the amended data will increase.
7 Four kinds of speed direct choose keys: We can directly choose the speed that is
suitable for us.
8 Window of calorie
9. Window of pulse
10.Window of time
11.Window of speed
12.Window of distance
1
Timing switch
2
Handle pulse sensor

DEBUGGING GUIDE

1 After finish assembling, insert safe key and pulse sensor into
the corresponding jack. 2 Before start, checking whether the
voltage is normal, 3-core cable has a good earth and pull the
running belt to check whether it moves well and if there is
exceptional noise. 3 Switch on the power and then all data in
the windows should be zero, the running belt is at rest state,
press start key, the belt will run at lower speed of 0.8km/h,
here observing if every part of treadmill is normal. 4 Press
'fast' key and 'slow' key to check whether they are normal. 5
Press 'stop' key to check whether the machine stop running
normally.
FOLD OPERATION
Tread the fold locking switch, and set down the main frame slowly.