Advertisement
4.9.
clamp work piece against fence (11) by using the two hooked rods (8) through the rod holder (9), retained with thumb screws (4d)
4.10.
lower arm (5) onto top of work piece and clamp in position with thumb screw (4c).
note: if mortise is to go right through work piece remember to fix a 1/2" plywood panel between the work piece and the
drill table to prevent chisel and bit striking the drill table.
4.11.
Align chisel with work piece and commence cutting mortise.
enVironment protection
recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: it is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
mA10.V2 | issue 3 15/02/18
Advertisement
