Upper Threading; Using The Automatic Needle Threader - Brother PQ-1500 Operation Manual

Threading (2)
Note
Please turn power is off before using automatic needle threader. Accidentally stepping on the foot controller during this operation could cause bodily injury or damage to the machine.

Upper Threading

8
9
0

Using the Automatic Needle Threader

Automatic
Needle
Threader
1 Pull hand wheel towards you until needle is in
the highest position, and lower presser foot.
2 Take thread in your left hand, and
gently pull it forwards.
1
7
6
2
4
3
5
Make sure thread take-up lever is in
highest position and presser foot is up.
A
When using polyester thread or thread
that tangles or breaks, run the thread
through all three holes of the thread guide.
Pin
3 Lower automatic needle threader.
Pull thread along the right side of the pin.
Do not force the needle threader lower than the
eye of the needle which is in the highest position.
1
6
2
4
5
Thread
4 Catch thread with hook.
Pull thread to the right, and make
sure it has been caught with the hook.
7
3
8
If the thread is still
tangles or breaks, run
the thread through the
holes backwards as
shown in diagram.
Hook
5 Turn the hook and raise needle
threader lever while gently holding
the end of the thread.
9
0
A
9