Threading The Needle - Brother PC-420 Operation Manual

Brother computerized sewing manching user's guide
Hide thumbs Also See for PC-420:
Table of Contents

Advertisement

Threading the needle

The needle threader can be used with needle size
75/11 through 100/16. For more details on the
needle, refer to "Needle types and their uses"
(page 33).
1
With your left hand, hold the end of the
thread passed through the needle bar thread
hook, and then pass the thread through the
thread guide discs from the front.
1
2
1 Thread guide discs
2 Pass to the back.
3 Pass through the slit.
2
Cut the thread with the cutter on the left side
of the machine.
1
1 Thread cutter
3
5
3
Lower the presser foot lever.
1 Presser foot lever
The presser foot is lowered.
4
Lower the needle threader lever until it clicks.
1
1 Needle threader lever
The thread is passed through the eye of the
needle.
5
Release the needle threader lever.
6
Carefully pull on the loop of thread passed
through the eye of the needle to pull out the
end of the thread.
1
Upper Threading
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pc-420prwNx-400Nx-400q

Table of Contents