Brother PC-420 Operation Manual page 117

Partially removing threads is called "drawnwork".
This gives a beautiful result with fabrics that have a
loose weave.
Two ways to create drawnwork are described below.
■ Drawnwork (Example 1)
Pull out several threads from the fabric.
1
Attach monogramming foot "N".
2
• For details, refer to "Replacing the presser
foot" (page 37).
33
3 Select stitch .
• For details, refer to "Selecting stitching"
(page 68).
With the right side of the fabric facing up, sew
4
along the right edge of the frayed section.
N
5 Press (settings key) in the operation panel.
The settings screen appears.
6 Press , ,
is selected.
7 Press (OK key).
The screen for mirror imaging the pattern
appears.
8 Press to select
To return to , press
The pattern is flipped.
9 Press (OK key).
The initial stitch screen appears again.
0 Sew along the other edge of the frayed section
so that it looks like the previous stitching.
N
a Set the mirror image pattern setting back to
.
Decorative Stitching
and (arrow keys) until
.
.
111