Cleaning - Beem SW2.1 Instruction Manual

• Turn the thermostat turnable knob to the required position. The thermostat allows a
variable setting of the water temperature. With the choice between: boil / simmer /
hot / warm.
• If the thermostat turnable knob is turned to maximum, then the water is heated to
boiling point. The water would continue to boil until it has all boiled away. To avoid
this happening, after the water has heated, turn the thermostat turnable knob back
until the blue signal light switches off. The thermostat now controls the temperature
of the water and is heated only when necessary; saving power and costs. The blue
signal light shows how the heating is switched on and off by the thermostat.
Approximate temperatures:
- Boiling water:
- Hot water:
- Warm water:
• The appliance is off when the thermostat turnable knob is turned to "O". The blue
signal light switches off.
• For your safety remove the mains plug after use.
CAUTION: Don't carry the appliance when the water container is filled. Empty
the container or remove it from the housing when you move the appliance.
7

Cleaning

WARNING
Risk of burning
Before cleaning always pull out the mains plug and let the appliance
cool down.
DANGER
Danger to life from electric shock
Never immerse the appliance in water or other liquids.
CAUTION
Damage to property
If the inner base of the water container becomes coated with scale, it
can lead to damage of the appliance. Never use aggressive, abrasive or
chemical cleaning products.
BEEM – Elements of Lifestyle
Thermostat turnable knob turned to maximum;
Water temperature approx. 100°C
Approx. 1/8 turn back;
Water temperature approx. 85°C – 90°C
Approx. 1/4 turn back;
Water temperature approx. 50°C – 60°C
Seite/Page 17 / 28