Key Illustration; Assembly Of The Food Slicer/Shredder Attachment And Changing Cones; Fitting Food Slicer/Shredder Attachment To Beem Miracle Chef Km 1700S - Beem Miracle Chef KM 1700 S Instruction Manual

1. Key Illustration

1) Ring
2) Thick slicer (cone)
3) Fine shredder (cone)
4) Thin slicer (cone)
5) Coarse shredder (cone)
6) Body
7) Food Pusher
8) Driveshaft (not visible on illustration)
Before use, thoroughly wash the components of the food slicer/shredder
attachment
2. Assembly of the food slicer/shredder attachment and changing
cones
Unscrew locking ring. In order to avoid injury, use a towel or something protective to grip the cone
and slightly turn counterclockwise to loosen from driveshaft and take out.
Insert disired cone (driveshaft remaining inside the body) and turn cone clockwise to make sure
cone is positivly located onto driveshaft. Re-fit locking ring.
3. Fitting food slicer/shredder attachment to BEEM Miracle Chef
KM 1700S
To fit food slicer/shredder attachment please pay attention to chapters „Fixing the mixing
bowl in place" and „Fitting the transparent protective cover" on page 15-16 and to
chapter „Coupling for accessory parts" on page 20 of the instruction manual of your
BEEM Miracle Chef KM 1700S.
Warning! To avoid injury, please note that during using optional
attachments the protective cover and the stainless steel bowl have to
be mounted with motorhead down
BEEM – Elements of Lifestyle
6 / 23