Checking Your Glucose - Abbott FreeStyle Libre 2 User Manual

• Before you start your Sensor, choose which device you want to use. If you
start the Sensor with the App, you will be unable to use the Reader to
check your glucose or receive alarms.
2. Hold the top of your iPhone near the Sensor (this can be done over clothing).
Do not move your iPhone until you hear a tone and/or feel a vibration. This
completes the scan.
Note: Note:
• If you need help, tap HOW TO SCAN A SENSOR
tutorial. You can also access this later by going to the Main Menu and then
tapping Help Help.
• If your Sensor is not successfully scanned, you may receive this Scan Error:
'Your scan was unsuccessful. Tap the scan button and scan again.'
See Troubleshooting
3. The Sensor can be used to check your glucose after 60 minutes. While the
Sensor is starting up you can navigate away from the App. If notifications are
enabled, you will see a notification when the Sensor is ready.
CAUTION: CAUTION: Low and High Glucose Alarms are not available during the 60
minute startup period.
Note: Note: If you get a new phone after you've started a Sensor, you can
continue to use the Sensor and receive alarms. Your settings and data are
tied to your LibreView account and not to your phone, so you just need to
download the App again and log in to your LibreView account.

Checking Your Glucose

Checking Your Glucose
1. Open the App and tap the scan button
Note: Note: If the Ready to Scan dialogue disappears, tap the scan button
2. Hold the top of your iPhone near the Sensor until you hear a tone and/or feel
a vibration.
3. The My Glucose screen now displays your glucose reading. It includes your
Current Glucose, a Glucose Trend Arrow indicating which way your glucose is
HOW TO SCAN A SENSOR to view an in-app
for additional error messages.
.
ART41753-100_rev-A 5:36pm 18-JAN-2021
again.