Advertisement
Assembly instructions
Unpack SKYSCREEN using suitable implement to avoid damaging contents and lay SKYSCREEN out as shown.
Ensure side rail slots on
inside of corner moulding lip.
Repeat steps above for other corners. Test operation of screen.
A
Lay cassette and side rail face down as shown. Line up and
slot corner radius into side rail.
Continue to slot side rail
onto corner moulding.
Lift crossbar and
continue to slot side rail.
Click !!
Contents:
B
A. Blind/Fly Cassettes - 2 off
B. Side Rail - 2 off
Side rail clips into place as
shown, a definite click should
be heard.
Page 2 of 8
Advertisement
