Page 2
Page 2 of 8 Assembly instructions Unpack SKYSCREEN using suitable implement to avoid damaging contents and lay SKYSCREEN out as shown. Contents: A. Blind/Fly Cassettes - 2 off B. Side Rail - 2 off Lay cassette and side rail face down as shown. Line up and slot corner radius into side rail.
Page 3 of 8 Tensioning the Blind or Fly The SKYSCREEN Is assembled and tested before shipping and does not need tensioning. However if tensioning is lost for any reason, please follow the steps below. With the screen facing you, the tension adjustment is located under the right hand top screw cover Remove screw cover and turn the SKYSCREEN over.
Page 4
Ensure that the SKYSCREEN is the correct way up and in the desired orientation. • Make sure that the SKYSCREEN is not twisted; distortion will damage the blind and affect operation. Open screw covers as shown. Turn over and remove protective covers from adhesive pads in each corner.