RadioMaster TX16S Quick Start Manual page 4

CAUTION!
DO NOT charge 6.6v LiFE battery packs or Li-ion 18650 cells with nominal voltage of 3.6v. Incorrectly
charging the wrong battery type may lead to damage of the radio or fire.
Regularly check the health and condition of your batteries and never leave your radio charging unattended.
Always charge in a safe area away from combustible materials and surfaces. Do not charge if your radio
becomes wet or damaged in any way.
RadioMaster does not accept any liability for the use or misuses of this product.
Model selection and protocol selection
TX16S comes with a 4-in-1 multi-protocol high-frequency module, which is compatible with many different
protocols. To view the latest list of all compatible protocols, please visit: https://github.com/pascal-
langer/DIY-Multiprotocol-TX-Module/blob/ master / Protocols_Details.md. Please note that new protocols
are constantly updated and added to the latest firmware, and some new protocols may require firmware
upgrades.
• Press and hold the MDL button to enter the model setup, select MULTI in the MODEL SETUP page, and
select the protocol to be used in the sub-options.
• The Bind button is used to start the linking process.
• The Range button reduces power to 1/30 to facilitate testing of remote control distances.
Note
OpenTX software is very powerful and has a large number of programming and mixing functions. Please
download the comprehensive software installation guide for more detailed instructions from the following
link: https://www.open-tx.org
3