❸ Part Names Of The Projector - Canon LV-7370 User Manual

❸ Part Names of the Projector
Front/Top
Zoom lever
(see page 30)
focus ring
(see page 30)
remote sensor
(see page 9)
adjustable tilt foot lock Button
(see page 29)
adjustable tilt foot
(see page 29)
* This security slot supports the MicroSaver ® Security System.
Rear
lamp Cover
(see page 68)
terminal Panel
(see page 6)
Ventilation (inlet) / filter Cover
(see page 67)
do not block this vent.
troubles or fire can result.
Carrying handle
Main Power switch
When you plug the supplied power cord into an
active wall outlet and turn on the Main Power, the
POWer indicator turns orange and the projector
is in standby mode.
(see page 24)
lens
rear foot
aC input
Connect the supplied power cord's two-pin plug here, and
plug the other end into an active wall outlet. (see page 23)

Controls
(see page 6)
Built-in security slot (
Ventilation (inlet) / filter Cover
(see page 67)
do not block this vent.
troubles or fire can result.
lens Cover
Be sure to remove the lens cover dur-
ing projection. the cap can deform or
fire can occur.
Monaural speaker (7W)
Ventilation (outlet)
heated air is exhausted from here.
do not block this vent. troubles
or fire can result.
spacer (black rubber)
a spacer is provided for leveling the projector.
to fine-adjust the height of the rear foot,
remove the spacer and rotate the rear
foot to the desired height.
. Introducton
)*