Canon LV-7370 User Manual page 79

1. Remove the lamp cover.
there are two locks on the left and right sides.
(1) Use the tip of the flathead screwdriver to push and release one lock.
(2) Do this for the other lock.
(3) Slowly pull the lamp cover in the direction of the arrow and lift it.
2
2. Remove the lamp.
(1) Loosen the two screws securing the lamp until the phillips screwdriver goes into a freewheeling condition.
• The two screws are not removable.
• There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this
interlock.
(2) Remove the lamp by holding it.
lock
(Push here)
1
interlock
3
CAUTION:
Make sure that the lamp is cool enough
to before removing it.
70
6. Mantenance