Replacing Consumable Parts - Canon imageFORMULA DR-M160 User Manual

4
Click the [Maintenance] tab and then change the value of
[Reduction ratio adjustment].
The adjustment value can be set within the range from -3.0% to
3.0%.
5
Click [OK] to close the scanner properties.

Replacing Consumable Parts

The two rollers (feed roller and retard roller) installed in the scanner
are consumable parts. The feed roller and retard roller wear with
scanning. If the feed roller and retard roller are worn, documents may
not feed correctly and paper jams and double feeds may occur.
When more than 200,000 pages have been fed (total number of pages
fed by the scanner), a message prompting you to replace the rollers is
displayed when the computer is started.
If this message begins to be displayed at startup, purchase an
exchange roller kit and replace the worn parts with the consumable
parts included in the kit (feed roller and retard roller).
details about the exchange roller kit.
Furthermore, the counter in the scanner that records the number of
pages fed also needs to be reset when you replace the rollers.
p. 69)
Hint
Even before it becomes time to replace the rollers, scanned images
may become stretched in the vertical direction due to wear of the
rollers. If this happens, adjust the reduction ratio.
Opening and Closing the Front Unit
1
Open the document eject tray.
66
See p. 82 for
(See
(See p. 65)