Canon imageFORMULA DR-M160 User Manual page 47

Back Up / Restore
Use the [Back Up] and [Restore] buttons to back up the configuration
file (settings, registered jobs, etc.) of CaptureOnTouch and restore the
settings from the backup data.
IMPORTANT
Please note that when a job with the output method set to [Send to
SharePoint] is registered, the setting items related to SharePoint will
not be backed up.
[Back Up] button
Back up the settings of CaptureOnTouch to a backup file (*.reg). You
can store the initial settings of CaptureOnTouch by performing a
backup before you first use CaptureOnTouch.
[Restore] button
Restore the settings from the backup registry file.
When using multiple scanners, you can back up the environmental
settings of one scanner and then perform a restore on the other
scanners so that all of the scanners have the same settings.
[E-mail settings] Tab
On the [E-mail settings] tab, set the maximum size for the image files
to be attached to e-mail.
Maximum size of attached file
Select the [Display confirmation message if file size exceeds the
above] check box to display a confirmation message when an
attached file exceeds the maximum size.
• For Scan First, a confirmation message appears if the file size of
scanned images is larger than the file size set here.
• For Select Scan Job, a confirmation message appears if the set file
size is exceeded during scanning.
[Theme] Tab
On the [Theme] tab, specify the appearance of the main screen of
CaptureOnTouch.
Select theme
Specify the appearance type for the main screen of CaptureOnTouch
with [Select theme].
47