Remote Control - LA VAGUE LV-HD120 Instruction Manual

REMOTE CONTROL

On / Off button
Aspect ratio 16:9 / 4:3
Menu navigation
Decrease volume
OPERATING INSTRUCTIONS
Connecting the power cable
Connect the power cord to the side of the projector and a power outlet.
Powering On
Press the „On/Off" button on the top of the projector or on the remote control. When the
power is turned on, the main screen appears.
There is an additional „On/Off" switch on the back of the projector. This allows you to use
the projector on the move due to the built-in battery (with the switch in the „On" position).
Please note: To charge the battery, the switch must be in the „On" position. The battery will
not be charged when the switch is in the „Off" position.
If you are not going to use the projector, we recommend that you set the switch to „Off" to
10
OK
Menu
-
Settings
Change image orientation
Select input
Confirm selection
Main screen
Back
Increase volume
x
+
Mute