I/O Configuration - Yamaha MY8-LAKE Owner's Manual

2.
Drag the module scroll bar to the
left (or tap the button at the
bottom right) to reveal the eight
modules of the MY8-LAKE
Frame as shown below.
Scroll bar
Module
3.
Tap on one of the eight module
icons, then drag the resulting
cursor (of blank circles) to the
main work area and tap again.
The icons will move from the scroll bar
as shown below.
The existing data will be read from the
hardware to synchronize the Controller
with the MY8-LAKE. The Frame is now
online and ready for control and
adjustment.
14 MY8-LAKE Owner's Manual

I/O Configuration

This section describes how to configure the
input and output routings for a module.
4.
Tap a module icon in the work
area to select it.
Additional functions are activated on
the button bar at the bottom of the
screen when a module is selected.
I/O Config button
5.
Tap the [I/O Config] button at the
bottom of the screen.
The I/O Config screen (Simplified view)
will be displayed by default for the
MY8-LAKE card.
The left side of the screen provides
summary information regarding the
Digital Clock and Input Configuration,
as well as selection options for the
Analog Output Reference of the host
device, Routing Mode and the
Operation Mode of the card. Tapping
on a magnifying glass icon or on the
summary text will open a pop-up
screen with additional data; the right
side of the screen provides interactive
signal flow diagrams.