Table Of Contents - Jeulin 211 022 Quick Start Manual

Measurement
Air/Water oxymeter Initio
Ref :
211022
Button on/off (5)
Adjustment Button
at 20,9% (6)
Body of the
probe (7)
Feature level to minimum
immersion (8)
Sampler head (9)
ENGLISH
1 General Information
This measuring device of the Initio range facilitates the measurement of the
concentration of dioxygen in the air and water. It is particularly adapted for
the study of animal or human breathing.
II can be used, as measuring device alone, as Ex.A.O. by connection to the
entry tension of an interface, thanks to its analogical exit +/- 5V proportional
to the O2 value.
2 Scale
In the air :
0 to 25%
0 à 100 %
In water :
0 to 20 mg/L
3 Commissioning
Take off the plastic film of the battery box (1) and press button on/off (5)
located on the left side of the screen.
The sampler requires a 5 minutes heating period. During this time, the red
LED (10) indicating the state of the sampler head is twinkling and a
calculation of time (in seconds) is registered on the displayer (11) (during this
time, the analogical output voltage reaches 0 Volt).
7
Displayer (11)
Selection of the
measurement
Power: Voltage
Adaptor
12 V
not provided (4)
State of the
DEL d'état de
Sampler head
chauffe
Red LED (10)
Access
valve to the
batteries (1)
Analogical
output (2)
range (3)