Download Print this page

Jeulin 211 022 Quick Start Manual

Air/water oxymeter initio

Advertisement

Available languages

Available languages

Quick Links

Mesure
Measurement
Réf :
211 022
Oxymètre Air/Eau Initio
Français – p 1
Air/water Oxymeter Initio
English – p 7
Version : 8004

Advertisement

loading

Summary of Contents for Jeulin 211 022

  • Page 1 Mesure Measurement Réf : 211 022 Oxymètre Air/Eau Initio Français – p 1 Air/water Oxymeter Initio English – p 7 Version : 8004...
  • Page 2 Mesure Oxymètre Air/Eau Initio Réf. : 211 022 1 Généralités Cet appareil de mesure de la gamme Initio permet de mesurer la concentration de dioxygène dans l’air et dans l’eau. Il est particulièrement adapté pour l’étude de la respiration animale ou humaine.
  • Page 3 Mesure Oxymètre Air/Eau Initio Réf. : 211 022 4 Réglage Le premier réglage de l’oxymètre se fait uniquement sur la gamme de mesure 0-25%, il est valable pour la mesure dans l’air et dans l’eau. Période de chauffe Attendre que la période de chauffe de 5 minutes soit écoulée (La DEL d’état de chauffe (2) ne clignote plus).
  • Page 4 Mesure Oxymètre Air/Eau Initio Réf. : 211 022 Mesure dans l’eau Mettre en marche l’appareil. Placer le curseur de choix du milieu sur la « goutte ». Pour gagner du temps lors des manipulations en milieu liquide, il est conseillé de démarrer son oxymètre avec la sonde dans le milieu. Le temps de stabilisation de la sonde de 5 à...
  • Page 5 La mise en route du système sera sensiblement écourtée. (cf 5.2 : Mesure dans l’eau). Utiliser un volume d’enceinte adapté : les enceintes Jeulin de 250 ml (Réf. : 453 066) et 500 ml (Réf. : 453 057) sont parfaitement adaptées pour un poisson rouge de taille moyenne (7-8 cm).
  • Page 6 Mesure Oxymètre Air/Eau Initio Réf. : 211 022 Le taux d’O chute fortement : L’agitation n’est pas suffisante. La sonde n’est pas stabilisée. La valeur est nulle : Les 5 minutes de temps de chauffe ne sont pas terminées. Les paramètres physico-chimiques de l’eau utilisée peuvent influer sur le résultat :...
  • Page 7 Compte tenu du fait que la tête de sonde s'use en fonction de l'utilisation (voir chapitre 7), elle n'est pas concernée par la garantie de 2 ans. Pour toutes réparations, réglages ou pièces détachées, veuillez contacter : JEULIN - SUPPORT TECHNIQUE Rue Jacques Monod BP 1900...
  • Page 8: Table Of Contents

    Measurement Air/Water oxymeter Initio Ref : 211022 1 General Information This measuring device of the Initio range facilitates the measurement of the concentration of dioxygen in the air and water. It is particularly adapted for the study of animal or human breathing. Access Button on/off (5) valve to the...
  • Page 9 Measurement Air/Water oxymeter Initio Ref : 211022 4 Adjustment The first regulation of the oxymetre is only made on the range of measure 0-25 %, it is valid for the measure in the air and in the water. Period of stoking period Wait until the 5 minutes heating is over (the DEL of state of stoking...
  • Page 10: Button On/Off

    Measurement Air/Water oxymeter Initio Ref : 211022 Measurement in air Switch on the device. Wait until the 5 minutes heating period is over. Place the medium selection curser on the “cloud”. The measurement is made immediately. Measurement in water Switch on the device. Place the medium selection curser on the “droplet”.
  • Page 11 Measurement Air/Water oxymeter Initio Ref : 211022 To disassemble the sampler head, hold tight the body and the sampler head and then pull. Check if the joint ring of the sampler’s body is correctly positioned in the throat. Insert the head in the body by pushing the tip of the sampler. The sampler head is an electrical device and should never be thrown away with household waste.
  • Page 12 Air/Water oxymeter Initio Ref : 211022 Use a receptacle of appropriate size. Jeulin 250 ml (Ref. : 453 066) and 500 ml (Ref. : 453 057) receptacles are totally suitable for an average-size goldfish (7-8 cm). 9 Most frequent causes of difficulties...
  • Page 13: Analogical Output

    Measurement Air/Water oxymeter Initio Ref : 211022 Analogical output : +/- 5 Volt The black socket reaches 0 Volt – 5 V on the yellow socket corresponds to zero in the range of measurement + 5 V on the yellow socket corresponds to the maximal value of the range of measurement Power : 2 alkaline LR6 batteries or 12 V plug (not delivered) 11 Influence of the temperature...
  • Page 14 The two year guarantee doesn’t concern the sampler head, since it is only used contingent upon the use of the equipment (see chapter 7). For any repairs, adjustments or spare parts please contact : JEULIN – TECHNICAL SUPPORT Rue Jacques Monod BP 1900...
  • Page 15 Measurement Air/Water oxymeter Initio Ref : 211022 NOTES ENGLISH...