Canon PIXMA iP6220D Series Easy Setup Instructions page 2

5
Windows ® Printer Driver Installation
The screens below refer to Windows XP Service Pack 2 installa-
tion. Screens may differ depending on the operating system
you are using.
1 TURN THE PRINTER OFF.
You hear the operation sound until the printer is turned off.
It may take about 20 seconds.
Turn the computer on and start Windows.
2
NOTE:
·Before installing the driver, disable all anti-virus programs
and automatically loading programs.
·For Windows XP or Windows 2000, log on to Windows as a
member of Administrators group before continuing.
·Do not switch users during the installation process.
IMPORTANT: If you see the Found New Hardware Wizard,
click Cancel. Next, remove the USB cable connected to your
computer. Then proceed from step 3 to install the printer
driver.
3 Insert the Setup Software & User's Guide CD-ROM.
The setup program should run automatically.
When the main menu screen appears, click Easy Install and
4
follow the on-screen instructions.
NOTE:
·Select Easy Install in order to install application software,
on-screen manual, utility and printer drivers. Select Custom
Install in order to choose the options you would like to
install.
·To install PhotoRecord, click Custom Install and follow the
instruction on the screen.
5 When the Easy Install screen appears, click Install.
NOTE: Move the cursor over items to display explanations of
each application below.
6 Read the License Agreement, then click Yes.
Installation of the printer driver, on-screen manuals, and
applications will begin. Follow the instructions displayed on
the screen.
If the message asking for your confirmation to restart your
computer appears, click OK.
The system is restarted automatically.
Part no. QA7-3644-V02 ©2005 CANON INC. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Printed in Thailand.
7 When the Printer Connection screen appears, connect the USB
cable to the computer and the other end to the printer.
8 TURN THE PRINTER ON.
IMPORTANT: If you cannnot proceed to the next procedure after
two minutes, refer to "Troubleshooting" instructions
in the Quick Start Guide.
If the message asking for your confirmation to restart your com-
puter appears, click OK.
The system is restarted automatically.
9 Follow the on-screen instructions to install the remaining soft-
ware. When the Installation Results screen appears, click Next.
Follow the on-screen instructions to register your product.
10
When the Installation completed successfully screen appears,
11
click Exit.
If Restart is displayed, ensure the Restart the system now (rec-
ommended) check box is selected, then click Restart.
5
Macintosh ® Printer Driver Installation
NOTE:
·Before installing the driver, disable all anti-virus programs and
automatically loading programs.
·Use Mac ® OS X v.10.2.1 to 10.3.x.
·The screens below refer to Mac OS X v.10.3.x installation.
Screens may differ depending on the operating system you are
using.
·Do not remove or insert the USB cable during installation, as this
may result in the computer or printer not operating normally.
1 Connect the end of the USB cable to the computer, the other to
the printer.
2 Turn on your Mac OS X.
3 Insert the Setup Software & User's Guide CD-ROM.
NOTE:
·If the CD-ROM folder does not open automatically,
double-click the CD-ROM icon on the desktop.
·Log on as an Administrator before continuing.
4 Double-click the Setup icon.
When the Authenticate screen appears, enter your administra-
5
tor name and password. Click OK.
If you do not know your administrator name or password, click
, then follow the on-screen instructions.
When the main menu screen appears, click Easy Install and fol-
6
low on-screen instructions.
NOTE: Select Easy Install in order to install application software,
on-screen manual, utility and printer drivers. Select
Custom Install in order to choose the options you would
like to install.
7 When the Easy Install screen appears, click Install.
NOTE: Move the cursor over items to display explanations of
each application bellow.
8 Read the License Agreement, then click Yes. Installation of
the printer driver, on-screen manuals and applications will
begin.
Follow the instructions displayed on-screen.
9 Follow the on-screen instructions to register your product.
10 When the Installation completed successfully screen
appears, click Restart .
After restarting the computer, select Applications from the
11
Go menu.
Double-click the Utilities folder, and then double-click the
Printer Setup Utility (Print Center when you use Mac OS X
v.10.2.x) icon. Check that your printer name is displayed on
the Printer List. If your printer name is not displayed on the
Printer List, click Add to add the printer.
For details, refer to the Printer Setup Utility Help or Mac
Help.