Printed Paper Curls Or Has Ink Blots - Canon PIXMA iP4500 Series Quick Start Manual

Canon pixma ip4500: quick start
Hide thumbs Also See for PIXMA iP4500 Series:
Table of Contents

Advertisement

Printing Does Not Start/Printing Is Blurred/Colors Are Wrong/Straight
Lines Are Misaligned
Cause
Ink tank is empty.
The protective film is remaining.
Print Head nozzles are clogged.
The media is loaded with the wrong
side facing upwards.
Print Head is misaligned.

Printed Paper Curls or Has Ink Blots

Cause
Paper is too thin.
Open the Top Cover of the printer to confirm how the ink lamps light or flash,
and then take the appropriate action depending on the error condition. For
details, see "Getting the Ink Status Information" on page 28.
Make sure all of the protective film is peeled off and the air hole is exposed, as
illustrated in (A). If the orange tape is left as in (B), pull the orange tape and
remove it.
(A) Correct
L-shaped air hole is exposed.
(B) Incorrect
The tape is not peeled off.
Print the nozzle check pattern to check for uneven ink output.
For details on how to print the nozzle check pattern, how to clean the Print
Head, and how to perform Print Head Deep Cleaning, see "When Printing
Becomes Faint or Colors Are Incorrect" on page 34.
If the nozzle check pattern does not print out properly
Check if any of the missing colors are due to empty tanks.
If there is plenty of ink and the printer does not print, clean the Print Head
and then print the nozzle check pattern to check that ink is ejecting properly.
If the problem is not resolved after performing Print Head Cleaning
twice
Perform Print Head Deep Cleaning.
If the problem is not resolved after performing Print Head Deep Cleaning,
turn off the printer and perform Print Head Deep Cleaning again after 24
hours or later.
If the problem is still not resolved after performing Print Head Deep
Cleaning twice
The Print Head may be damaged. Contact your Canon Service
representative.
Many types of paper are made to be printed on only a particular side of the
paper.
Printing on the wrong side may cause unclear prints or prints with reduced
quality.
Refer to the instruction manual supplied with the paper for detailed information
on the printable side.
See "Aligning the Print Head" on page 43 and perform Print Head Alignment.
When printing data with high color saturation such as photographs or images in
deep color, we recommend using Photo Paper Pro or other Canon specialty
paper. See "Using Specialty Media" on page 4.
Action
(A)
(B)
Action
Troubleshooting
67

Advertisement

Table of Contents
loading

Table of Contents