Canon PIXMA iP4500 Series Easy Setup Instructions page 2

Windows Software Installation and Print Head Alignment
®
Note
• The screens below refer to Windows Vista™ operating system Ultimate Edition
(hereafter referred to as "Windows Vista") installation.
Screens may vary depending on the operating system you are using.
• Log into a user account with the administrator privilege.
• Before installing the software, disable all anti-virus programs and automatically
loading programs.
• A message asking for your confirmation to restart your computer may appear
during the installation process. If this message is displayed, follow the on-screen
instructions and click OK.
The installation resumes from where it left off when your computer has been
restarted.
• If the computer is restarted during installation, do not remove the Setup CD-ROM
during restarting.
Be sure to TURN THE PRINTER OFF before continuing.
a
(1) Press the POWER button.
(2) Make sure that the POWER lamp stops flashing.
b Turn the computer on and start Windows.
Important
If the Found New Hardware or Found New Hardware Wizard screen appears
automatically, remove the USB cable connected to your computer. Click Cancel
to quit the screen. In Windows Vista, the screen may close automatically when
the USB cable is unplugged. Then turn off the printer and proceed from step c
to install the printer driver.
c Insert the Setup CD-ROM. The setup program should run
automatically.
In Windows Vista, go to Step d. In Windows XP and Windows 2000, go to
Step f.
If the AutoPlay screen appears, click Run Msetup4.exe.
d
If the User Account Control screen appears, click Continue.
e
If the same screen reappears in subsequent steps, click
Continue.
When the main menu appears, click Easy Install.
f
The printer driver, On-screen Manuals, and application software are installed
automatically.
Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed the installation.
g When the list of applications to install appears, confirm the
contents, click Install.
Note
Move the cursor over items to display explanations of each application.
h Read the License Agreement carefully and click Yes. The
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
i When the Printer Connection screen appears, connect one
end of the USB cable to the computer, the other to the printer,
then TURN THE PRINTER ON. The printer driver will begin
identifying the printer port being used.
Part no. QT5-1273-V02 © 2007 Canon Inc. "Microsoft" is a registered trademark of Microsoft Corporation. "Windows" is a trademark of Microsoft Corporation, registered in the U.S. and other countries. "Windows Vista" is a trademark of Microsoft Corporation. "Macintosh" and "Mac" are trademarks of Apple Inc., registered in the U.S. and other countries.
Important
If you cannot go to the next procedure after 2 minutes, refer to "Troubleshoot-
ing" instructions in the Quick Start Guide.
←
To Computer
USB
j When the Print Head Alignment screen appears, make sure
that two sheets of supplied paper (MP-101) are loaded in
the Rear Tray (top paper feeder). Click Execute, confirm the
displayed message and click Print Head Alignment.
Note
• Print Head Alignment will take about 13 minutes to complete. Do not start another
operation here.
• Do not open the Top Cover and Inner Cover while printing.
The pattern is printed, and the Print Head is aligned automatically.
Note
• The pattern is printed in black and blue.
• When Automatic Print Head Alignment cannot be executed properly, the ALARM
lamp on the printer will flash orange eleven times. Refer to "ALARM Lamp Flashes
Orange" in "Troubleshooting" of the Quick Start Guide.
k After print head alignment is completed, click Next.
When the Installation Results screen appears, click Next.
l
m When the User Registration screen appears, click Next.
Note
To register later, click Cancel and go to Step n. After software installation is complete,
double-click on the desktop .
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the printer.
Serial Number
n When the PIXMA Extended Survey Program screen
appears, confirm the message. We would appreciate it if you
would take part in this program regarding the use of Canon
printers. If you can agree, click Agree.
o When the Installation completed successfully screen
appears, click Exit.
If Restart is displayed, make sure that the Restart the system now
(recommended) check box is selected, then click Restart.
Remove the CD-ROM after clicking Restart and restarting the computer.
Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
Software installation and print head alignment
are now complete.
Macintosh Software Installation and Print Head Alignment
®
Note
• Since Mac OS 9, Mac OS X Classic environments, or Mac OS X v.10.2.7 or earlier
®
are not supported, do not connect the printer to these.
• The screens below refer to Mac OS X v.10.4.x installation. Screens may vary
depending on the operating system you are using.
• Log on as an Administrator.
• Before installing the software, disable all anti-virus programs and automatically
loading programs.
Connect one end of the USB cable to the computer, the other
a
to the printer.
Note
Make sure the printer is turned on.
USB
Turn on your Mac and insert the Setup CD-ROM.
b
Note
If the CD-ROM folder does not open automatically, double-click the CD-ROM icon
on the desktop.
Double-click the Setup icon.
c
d When the Authenticate screen appears, enter your
administrator name and password. Click OK.
If you do not know your administrator name or password, click
, then follow the on-screen instructions.
When the main menu appears, click Easy Install.
e
The printer driver, On-screen Manuals, and application software are installed
automatically.
Note
If you want to select particular items to install, click Custom Install and follow the on-
screen instructions to proceed the installation.
f When the list of applications to install appears, confirm the
contents, then click Install.
Note
Move the cursor over items to display explanations of each application.
Read the License Agreement carefully and click Yes. The
g
software installation screen may appear during the installation
process. Follow the on-screen instructions to install the
software.
When the Start Setup screen appears, click Execute.
h
When the Printer Connection screen appears, confirm the
i
displayed message and click Restart.
The system is restarted automatically.
Note
Do not remove the Setup CD-ROM while your computer is being restarted.
When the Print Head Alignment screen appears, make sure
j
that two sheets of supplied paper (MP-101) are loaded in
the Rear Tray (top paper feeder). Click Execute, confirm the
displayed message, and click OK.
Note
• Print Head Alignment will take about 13 minutes to complete. Do not start another
operation here.
• Do not open the Top Cover and Inner Cover while printing.
The pattern is printed, and the Print Head is aligned automatically.
Note
• The pattern is printed in black and blue.
• When Automatic Print Head Alignment cannot be executed properly, the ALARM
lamp on the printer will flash orange eleven times. Refer to "ALARM Lamp Flashes
Orange" in "Troubleshooting" of the Quick Start Guide.
When the Setup Complete screen appears, click Next.
k
l When the User Registration screen appears, click Next.
Note
To register later, click Cancel and go to Step m. After software installation is complete,
double-click on the desktop.
Follow on-screen instructions to register your product. You will need your
product serial number, which is located on the inside of the printer.
Serial Number
When the Installation completed successfully screen
m
appears, click Exit.
If Restart is displayed, click Restart.
Remove the CD-ROM after clicking Restart and restarting the computer.
Note
Keep the CD-ROM in a safe place in case you need to reinstall the software.
Software installation and print head alignment
are now complete.
XXXXXXXX PRINTED IN THAILAND