Routine Maintenance; When Printing Becomes Faint Or Colors Are Incorrect - Canon PIXMA iP2600 Series Quick Start Manual

Routine Maintenance

When Printing Becomes Faint or Colors Are Incorrect

When printing becomes faint or colors are incorrect, the print head nozzles on FINE Cartridges are
probably clogged. Print the nozzle check pattern to confirm the condition of the nozzles and then
perform Print Head Cleaning.
If print results are not satisfactory, performing Print Head Alignment may improve print quality.
Note
Before performing maintenance
Make sure that a FINE Cartridge has not run out of ink. See "Getting the Ink Status Information" on
page 31.
Make sure that a FINE Cartridge is installed properly. See "Replacing FINE Cartridges" on page 33.
Make sure that the orange protective tape is removed from the bottom of a FINE Cartridge.
If the Alarm lamp flashes orange, see "Alarm Lamp Flashes Orange" on page 53.
Increase the Print Quality setting in the printer driver settings.
See "Print Results Not Satisfactory" on page 46.
Step 1
See "Printing the Nozzle Check Pattern" on page 19.
If lines are missing or if white streaks appear
Step 2
See "Print Head Cleaning" on page 22.
If the problem is not resolved after performing
Print Head Cleaning twice
Step 3
See "Print Head Deep Cleaning" on page 25.
If the problem is not resolved after performing
Print Head Deep Cleaning twice
Step 4
See "Replacing a FINE Cartridge" on page 31.
Note
If the straight line is misaligned or the Print Head position is misaligned, align the Print Head position.
See "Aligning the Print Head" on page 27.
18 Routine Maintenance
After cleaning the Print
Head, print and examine
the nozzle check pattern.