Canon PIXMA iP2600 Series Quick Start Manual page 18

2
Load the envelopes.
(1) Load the envelope against the right
side of the Rear Tray.
Load with the address side facing
UP and the rear flaps DOWN on
the left.
Up to 5 envelopes can be loaded at
once.
(2) Pinch the Paper Guide and slide it
against the left side of the
envelope.
Do not slide the Paper Guide too
strong. Paper may not be fed
properly.
(3) Set the Paper Thickness Lever to
the right.
Reset the Paper Thickness Lever
to the left when you finish printing.
3
Specify the settings in the printer driver.
(1) Select Envelope in Media Type.
(2) Select the size for envelopes.
In Windows
In Macintosh
(3) Select Landscape in Orientation.
Important
Be sure to set the printer driver setting properly. If you do not, the address will be printed in the
wrong direction.
Note
For details on printer driver settings, see "Printing with Windows" on page 16 or "Printing with
Macintosh" on page 17.
14 Before Using the Printer
®
, select DL Env. or Comm. Env. #10 in Page Size.
®
, select DL Envelope or #10 Envelope in Paper Size.
(B)
(2)
(A) Printing orientation
(B) Make sure the flaps are folded.
(1)
(A)
(3)