MTHTrains Premier 20-90003 Quick Start Manual

STEP
There will be two
7 7
spots of hot glue
holding the LEDs in
place. Use a screw
driver to loosen the
wires from the spots
of glue. Pull the LEDs
back towards the
inside of the shell to
remove them.
Replace the LEDs
with a new set and
use hot glue to put the
wires back in place.
Plug the wires back
into the connector
under the interior.
Reassemble.

LIMITED ONE YEAR WARRANTY

This item is warranted for one year from the date of purchase
against defects in material or workmanship. We will repair or
replace (at our option) the defective part without charge for parts
or labor, if the item is returned to the address below within one
year of the original date of purchase. This warranty does not
cover items that have been abused or damaged by careless
handling. Transportation costs incurred by the customer are not
covered under this warranty.
This warranty gives you specific legal rights and you may have
other rights which vary from state to state.
M.T.H. Electric T rains, Inc. • 7020 Columbia Gateway Drive • Columbia, MD 21046-1532
STEP
Turn the caboose
6 6
upside down and
unplug the red LED's
from underneath the
interior.
M.T.H.
ELECTRIC TRAINS, INC.
7020 Columbia Gateway Drive
Columbia, MD 21046-1532
The Premier N-8 Caboose offers a new level of
excitement and realism for your O Gauge
model railroad. Constructed from sturdy ABS
plastic, the N-8 Caboose was created from
quality components and has been designed for
years of operation.
The Premier N-8 Caboose comes fully
assembled, decorated and ready for use right
out of the box. The N-8 Caboose features an
illuminated interior and exterior marker lights,
controlled from track power. Use and operation
is made easy by following the instructions on
the following pages.
Caboose
N - 8