How Low Ink Setting Works; Display' Or 'Not Display' Remaining Ink Volume - Canon i475D Series Printing Manual

How Low Ink Setting Works

The remaining ink volume display on the operation panel is a function that monitors how much
ink is used, and indicates the remaining ink volume.
When you reset the ink counter, it will assume that the ink tank is full regardless of how much ink
actually remains. The reset is the only way to match the counter value with an actual ink volume.
Reset the ink counter when installing a new ink tank.
When the remaining ink volume is low;
The ink volume remaining in the indicated tank is low. A new ink tank should be
prepared.
When the color ink volume is low;
How to Display Low Ink Correctly
• Reset the ink counter every time you install a new ink tank.
The ink counter cannot work correctly unless you synchronize it with the actual ink
level. The ink counter can only be adjusted when it is reset at the time a new ink tank
is installed.
• Do not reset the ink counter of an ink tank in use.
Synchronization of the counter and the actual ink level will not work properly.
Important If you did not reset the counter when you installed the current ink tanks, the
low ink may not function correctly, until the next time you replace the ink tanks.
Also, be sure to treat both counters separately. Refer to the section "The ? mark
is displayed beside the ink tank icon." on page 39
When the black ink volume is low;
Replacing an Ink Tank
37