Canon i320 Setup Instructions

1
Unpack the Printer
1 Carefully remove all items from the box.
Series
Bubble Jet Printer
Print Head
Power Cord
Ink Tanks
BCI-24 Black BCI-24 Color
Documentation
and Software Kit
NOTE: The " 320 Setup Software & User's
Guide" CD-ROM contains printer drivers,
software applications and electronic manuals.
2
Prepare the Printer
1 Remove the shipping tape from the printer.
Shipping Tape
2 Open the front cover. Remove the packing
material from the print head holder.
Serial number
Packing
material
Print head
holder
NOTE: The serial number is located to the right
of the print head. You will need this to register
the product.

Start Here

Easy Setup Instructions
3
Install the Print Head
1 Remove the print head from its package.
2 Turn the print head over, then remove
the orange protective cap.
NOTE: Do not touch the electrical contacts.
Electrical contacts
Print head nozzles
3 Raise the gray lock lever.
4 Slide the print head into the holder until
it is securely seated.
5
Lower the gray lock lever until it locks
into place.
4
Install the Ink Tanks
1 Remove the black ink tank (BCI-24 Black)
from its packaging and pull off the orange
protective cap.
Protective cap
NOTE: To avoid spilling ink, do not touch the
bottom of the tank once you have removed
the protective cap.
2 Insert the black ink tank into the slot on
the right. Press down until the ink tank
locks into place.
3 Repeat the procedure for the color ink
tank (BCI-24 Color), inserting it into the
remaining slot.
4
Close the front cover. Pull out the paper
rest and the output tray.
Color Bubble Jet Printer
5 Connect the Printer
To Your Computer
1 Plug the power cord into the back of the
printer and connect the other end to a
power outlet.
IMPORTANT: BE SURE THE PRINTER
IS OFF , or the computer will attempt
to install the printer driver before
the printer is ready.
2
Connect one end of a USB cable (not
included) to the computer, the other to
the printer.
USB Port
USB Cable
Continue with Step 6
on side two.