Power Supply; Cleaning And Maintaining The Printer - Canon BJC-S830D Quick Start Manual

Power Supply

Never attempt to plug the power cord into a power outlet when your hands are wet.
To avoid electric shock, make sure that your hands are dry.
• Always push the plug completely into the power outlet. A loose or poorly connected plug could cause a fire or
electric shock.
Never cut, modify, stretch, bend, or twist the power cord, or never place heavy objects on the
power cord. A power leak from a damaged power cord could cause a fire or electric shock.
Never plug the printer power cord into a power outlet (power board, double adapter, etc.)
that is shared by other devices or office equipment. To help prevent the hazards of fire or
electric shock, avoid overloading power points.
• Never use the printer if the power cord is bundled or knotted. To help prevent the hazards of fire or electric
shock, make sure the power cord is straight.
If you detect smoke, unusual odors, or strange noises around the printer, immediately
press the POWER button to turn off the printer and disconnect the power plug. To reduce
the risk of fire or electric shock, never use the printer under these conditions. Call the
Canon Customer Care Center.
• Always grasp the plug when you unplug the power cord. Pulling on the power cord could damage the cord and
cause a fire or electric shock.
Never use an extension cord. To help avoid a fire or electric shock, always plug the power
cord directly into the power outlet.
Never use a power supply voltage other than that supplied in the country where you
purchased the printer. Using incorrect voltage could cause a fire or electric shock.
The correct power supply voltage for this printer is AC 120V, 60 Hz.

Cleaning and Maintaining the Printer

• Use only a slightly damp cloth to clean the printer. Never use flammable solvents like alcohol, benzene,
thinner, etc. If a flammable solvent contacts an electrical component inside the printer, a fire or electric shock
could result.
• Always unplug the printer power cord before you clean the printer. If you mistakenly turn on the printer while
cleaning it, you could touch moving components inside the printer and suffer injury.
• Never attempt to disassemble or modify the printer. The printer contains high voltage components which
could cause a fire or serious electric shock.
Working Around the Printer
Never use flammable sprays near the printer. Gases in the spray could cause a fire or
electric shock if they come in contact with electrical components inside the printer.
Never insert your fingers or hands inside the printer while it is printing. The printer
contains moving parts which could cause injury.
Appendix
75