Canon BJC-S530D Quick Start Manual page 75

Handling Error Messages While Using the Operation Panel
If an error number is displayed on the Operation Panel, correct the error according
to the procedure below.
If the display or buttons on the Operation Panel are not operating
properly, even though an error is not displayed, turn off the printer,
unplug the power cord, and then turn on the printer again.
The color of the ink tank affected by the error can be checked in
Media Type. An error has occurred in the ink tank indicated by the
blinking position.
Error
Problem
Number
001 Printer is
being used
002 Printer is not ready
101 Ink level is low
102 Position of paper
thickness lever is
incorrect
103 Position of paper
thickness lever is
incorrect and ink
level is low
201 Ink has run out
301/302 No paper, paper
cannot be fed, or
paper jam
401 Front cover
is open
Printing starts when printing from the computer is completed. Press the
Cancel button to stop printing.
Wait until preparations are completed. Printing will start when
preparations are completed.
Prepare a replacement ink tank. Press the Print button to restart printing
even though the print level is low. Printing will start when the ink tank is
replaced. Press the Cancel button to stop printing.
Printing will start when you set the paper thickness lever to the correct
position. Press the Print button to start printing with paper thickness lever
position that is currently set. Press the Cancel button to stop printing.
Prepare a replacement ink tank. Replace the ink tank, and set the paper
thickness lever to the correct position to start printing. Press the Print
button to restart printing under the current conditions.
Press the Cancel button to stop printing, and then replace the ink tank.
Press the RESUME/CANCEL button (next to the POWER button) on the
printer to start printing without any ink.
Load paper correctly, and press the RESUME/CANCEL button (next to the
POWER button) on the printer to start printing. If a sheet is jammed, remove
the jammed sheet, load paper correctly, and then press the RESUME/
CANCEL button on the printer.
Close the front cover to start printing.
Troubleshooting
Try This
71