Table of Contents
Advertisement
To use a memory card:
The following procedure is different if you are using a memory
card when the printer is connected to the computer. See the
S530D User's Guide on the Setup Software & User's Guide CD-ROM.
1.
Turn on the printer.
2.
Insert the PC card adapter into the card slot all the
way. The indicator lamp will light and the
display. If 'AT' is displayed on the panel, it indicates
that images will be corrected automatically when
you're printing data in formats supporting Exif 2.2
(Exif Print).
3.
Insert the PC card adapter into the card slot all the
way. The indicator lamp will light.
If you use your computer to modify content on the memory card,
make sure to print from the computer.
To eject the memory card:
1.
Make sure the indicator lamp is not blinking.
If you remove the memory card or switch off the power to the
printer while the indicator lamp is blinking, the data of the
memory card may be destroyed.
2.
Press the printer
POWER button to turn
off the printer.
3.
Check that the indicator
lamp is off, and press
the Eject button.
4.
Pull out the PC card
adapter.
Printing Without a Computer
mark will
POWER button
Indicator lamp
Eject button
27
Advertisement
Table of Contents
Troubleshooting
