To set the print mode in Windows:
1.
From an application File menu,
select Print.
2.
Make sure Canon S530D is the selected
printer, then click Properties.
3.
On the Main tab, click the Print Quality
that best describes your print job, then
click OK.
To set the print mode in Mac OS:
1.
From a Macintosh application File menu,
select Print.
2.
Select the Print Mode that best describes
your print job from the drop-down menu.
Changing the Page Setup
You can change how the image is printed without affecting the original image file.
To change the page setup in Windows:
1.
From an application File menu, select Print.
2.
With Canon S530D as the selected printer, click Properties.
3.
Click the Page Setup tab. Here you can change the following options:
Page Size Defaults to the page size set in the original document, but can
be changed.
Orientation Lets you select either portrait or landscape orientation.
Printer Paper Size The page size used by the printer. This defaults to match
the Page Size. However, a different printer paper size can be selected if a
Printing Type other than normal is selected (see below).
Basic Printing
9