Canon BJC-S530D Quick Start Manual page 74

Troubleshooting
Problem Possible Cause
Printer does Printer flashes
not print green only
(continued)
Low ink alert One or more of
displays in the ink tanks is
the BJ Status low
Monitor
Error Printer is out of
message paper
displays in
the BJ Status
Ink is low
Monitor
Paper jam
Print head
installed
incorrectly
System error System error
message occurred
displays
70
When the lamp flashes green, the printer is warming up or is receiving print
data from the computer. This is not an error condition.
After the alert displays, you can continue printing for a short time, but have
a replacement ready to install.
W
INDOWS
The low ink alert displays in the BJ Status Monitor.
M OS
AC
The low ink alert displays in a status dialog before a print job starts.
When Backgrounding is turned on, you can confirm the low ink alert
in the BJ Print Monitor. See the S530 User's Guide on the Setup
Software & User's Guide CD-ROM for more information on using the
BJ Print Monitor.
W
INDOWS
The BJ Status Monitor opens and displays a message when an
error occurs.
Read the error message, then click the Guide tab to display more
information about solving the problem.
M OS
AC
If Backgrounding is turned on in the Chooser, the BJ Print Monitor
displays an error.
Follow the instructions in the message to resolve the problem.
If a system error occurs, printing stops.
W
INDOWS
A window displays the error message. System errors may include
problems writing to LPT1 or USBPRN, application errors, or general
protection faults. Make sure that the printer is turned on, the printer
and computer are connected securely, and that the printer port is
operating correctly. Restart your computer and try printing again.
M OS
AC
The error message contains an error code *XXX, where * is a letter
and XXX is a number, which represents the cause of the error. Make
sure that the printer is turned on, the printer and computer are
connected securely, and that the printer port is operating correctly.
Try This