Brother ADDENDUM 884-T07 Operating Manual Addendum page 9

8 After the embroidery pattern has been
opened by the machine, the embroidering
screen appears.
The opened embroidery pattern appears in
the pattern display area with the icon for
the Link function.
1
2
3
1 Icon for Link function
2 10-digit machine ID
3 Number of the pattern in the queue
• Touch to delete the pattern.
Memo
● While the embroidery machine is
connected to the computer, the machine's
status can be displayed by using a function
of the embroidery editing software. If
multiple embroidery machines are
connected at the same time, check the
status of the machines using the 10-digit
machine ID that appears in the machine's
screen. The following information can be
viewed from the computer.
• Number of the stitch being sewn and
total number of stitches in the pattern
• Information about sewing errors
9 To change the embroidery settings for the
opened embroidery pattern, touch
• Touch
appears. Touch
embroidering screen.
The embroidery settings screen appears.
0 After the desired settings have been
specified, touch
embroidering screen.
a Touch
stop button to start embroidering.
When embroidering is finished, the
following message appears.
8
when the following message
to return to the
to return to the
, and then press the start/
.