Table of Contents
Advertisement
Macintosh
➤
Note
When background printing is enabled, the low ink warning displays on the
BJ Print Monitor (Macintosh).
■ How to Display Low Ink Warning Correctly
• Reset the ink counter every time you install a new ink tank.
The ink counter is only accurate when synchronized with the actual ink level.
To synchronize the counter with the actual ink level, the ink counter must be set only
immediately after installing a new ink tank.
• Do not reset the ink counter for an ink tank in use.
This would disrupt synchronization between the counter and the actual ink level.
➤
Note
• Ink counters for black and color ink tanks work independently of each
other. However, both start counting at the time you enable the low ink
warning. If you did not reset the counter for a specific ink tank when it was
first installed, the low ink warning may not function correctly for that tank.
Do not reset the ink counter until you install a new ink tank. Also note that
the counter for each ink tank must be started separately.
• Refer to
counters are not synchronized.
➡
BJ Print Monitor
"Low Ink Warning Displays Ink Tank with
'?'" if the ink tanks and
How Low Ink Warning Setting Works
Routine Maintenance
79
Advertisement
Table of Contents
