Table of Contents
Advertisement
Printed Surface is Scratched
■ Ensure that you are using suitable paper.
• The paper weight must be less than 28 lb. (105 g/m
If you use non-Canon brand paper heavier than 28 lb. (105 g/m
scratch the printed surface.
Clean the print head first and print with the correct paper.
• The paper must not be curled.
This problem can be resolved by turning the paper over.
• Before starting Borderless Printing, check the paper that you are using.
With Borderless Printing, the print quality may decrease or smudging may occur at the
top and bottom edges of the paper. Use Photo Paper Pro, Glossy Photo Paper, Photo
Paper Plus Glossy or Matte Photo Paper. If smudging still occurs, set the paper
thickness lever to the right and try printing again.
■ When printing on thick paper, set the paper thickness lever to the right.
This widens a gap between the print head and the paper. If the paper is scratched even
when printing on plain paper, also try this. A message will display saying that the position
of the lever is incorrect. Ignore the message and continue printing.
2
).
2
), the print head may
Print Quality is Poor or Contains Errors
Troubleshooting
144
Advertisement
Table of Contents
