Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Timotion PL600H
Summary of Contents for Timotion PL600H
- Page 1 PL600H / PL1000H 24V DC MOTOR SLIDING GATE OPENERS FOR RESIDENTIAL USER MANUAL...
- Page 2 Declaration of Conformity Applicant: Powertech Automation Inc. Manufacturer: Timotion Technology Co., Ltd. Address: Shiyong Minying Industrial Zone, Hengli Town, DongGuan City, GuangDong, China Model: PL600H, PL1000H, PR-2 1. Certificate of conformity of a product with the essential requirements art. 3.2 of the R&TTE Directive 1999/5/EC.
-
Page 3: Table Of Contents
7.5 PRB-1 External Receiver Box Data Sheet P.12 8. Additional Information P.12 8.1. PHOTOCELL INSTALLATION GUIDE P.12 8.2 Wire Connection and Setting of PRB-1 External Reciever Box P.13 8.3 Channel Transmitter Operation P.14 INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 4: Warnings
If there is a failure that cannot be solved and is not mentioned in this manual, please contact qualified Keep all the components of PL600H/ PL1000H system and installation personnel. this manual for further consultation. Do not use the gate-automated system before all the... -
Page 5: Installation
3. Safety photo sensor 4. Flashing light 2.2 Description of Device a. Operation gear e. Release device b. Limit switch device f. Control panel c. 24Vdc motor g. Terminals of devices d. Back-up batteries (Optional) INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 6: Dimension Of Device
2.3 Dimension of Device 2.4 Installation of Motor Gear and Gear Rack INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 7: Checking For Installation
Step2. Insert the key and turn counterclockwise to unlock the device. Step3. Turn counter-clockwise of the bar to release the motor To restore the automation, simply reverse the above procedure. Step1. Step2. Step3. INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 8: Setup And Function Setting
If the LED display is in normal performing refer to “4.2.1”, you can control the gate by either transmitters or the button on the board: “UP”-clockwise moving, “SET”- stop and “DOWN”- Counterclockwise moving. PF-1 PF-1 PPB-1 PKS-1 PPB-1, PKS-1: LED1 Photocells LED2 Photocells LED3 RF Learn INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 9: System Learning, Reset Process And Led Display
(F1 to FA). Then “CLR”: Reset Factory Setting. press SET to enter the sub function within each group, press UP or Down to select sub functions and press SET for confirmation. INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 10: Programmable Function Settings
Locks and, on release, continues opening 3.5 Programmable Functions of LED Display LED Display Programmable Functions “N-L”: The PL600H system learning is not done. “RUN”: The PL600H system is in normal performing. INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 11: Operations For Function Settings
~ (3) until you get “F2-5” as the right hand-side picture. “F2-5” is set completely. After setting all functions you need, then wait for 10seconds, the LED will display “RUN”. And you can use transmitter to operate the gate. INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 12: The Logic Of Gate Movements
PL600H/PL1000H are consist of different types of materials; some of them can be recycled such as aluminum, plastic, electric cables while some need to be disposed, such as electronic boards. -
Page 13: Additional Information
Operating Temperature C~+50 C~+50 Dimension LxWxH mm. 333 X 216 X 287 mm 333 X 216 X 287 mm Weight 7.5 kg 8 kg Speed 21.9 cm / sec 25.6 cm / sec INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 14: Photocell Data Sheet
RX: Connect terminals 1, 2 and 4 on the receiver with the terminals Ph+, GND and Ph1 on the P600B PCB. And use an extra wire to connect terminals 2 and 5 on the receiver as a bridge. INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 15: Wire Connection And Setting Of Prb-1 External Reciever Box
C on the same remote to control the 2nd device 3rd device: install an external receiver box, connect the output 2 to the 3rd device (such as garage door), use the Button D now to operate. INSTRUCTIONS PL600H/ PL1000H SLIDING GATE OPENER USER MANUAL... -
Page 16: Channel Transmitter Operation
Wire Connection: Orange -Signal 1 Blue -GND Yellow -Signal 2 Green -GND -12V/24V Black -GND a. Orange cable (Signal 1) connect to terminal 10 (Pb) on the control board b. Blue cable (GND) connect to terminal 11 (GND) on the control board c.
Need help?
Do you have a question about the PL600H and is the answer not in the manual?
Questions and answers