Canon BJC-1000 Series Setup Instructions page 3

Step 7: Install The BJ Cartridge
Open the front cover. The cartridge holder moves to the center.
Raise the blue cartridge lock lever.
Align the slot in the BJ cartridge with the yellow guide and gently insert the cartridge.
Press the lock lever down gently so that it locks into place. Do not apply excessive force.
Adjust the blue paper thickness lever for paper or envelopes.
Left for paper.
o
Right for heavier-weight media and envelopes.
o
Close the front cover. The cartridge holder moves to the right side of the printer (called the home
position).
Step 8: Load Paper
Move the paper guide to the left to match the width of your paper.
Fan a stack of paper and slide it into the sheet feeder until it stops.
Adjust the paper guide to the stack.
Make sure the stack of paper does not exceed the limit mark and tab.