Klarstein 10010176 Manual page 24

• Now disconnect the front part of the dispensing
unit (3) from the rear part by sliding them out of
each other.
It is recommended to place the clamp (29) as close to the
end of the connection hose on the outlet of the adapter as
possible to ensure a good connection.
• Insert the dispensing unit (3) as before into the
appliance. Pay attention not to bend the con-
nection hose. Press down the lever of the top-
mounted tap. Close the lid (1) of the appliance.
• You now have disconnected the front part of the
dispensing unit (3) with the connection hose.
• Connect the connection hose of the dispensing
• unit (3) with the clamp (29) to the Heineken ad-
apter or adaptor for Heineken keg (28).
• Draw beer with the dispensing tap handle (4) (fig. 6).
24