Canon Color imageCLASS MF8170c Software Manual page 113

Adjust the settings, then click [Scan].
3
[ScanGear MF] dialog box
For details, see "Setting Preferences and Scanning with ScanGear MF," on p. 3-19.
Scanning starts.
If you clicked [Mail], [Save] or [PDF] in step 3, a folder with the scanning date will be
created in the [My Pictures] folder in the [My Documents] folder, and your document
will be saved in this folder. If there is no [My Pictures] folder, the folder with the
scanning date will be created in the [My Documents] folder and your document saved
in this folder.
If you clicked [Mail], [OCR], [PDF], [Scan-1], or [Scan-2] in step 3, the scanned image
will be displayed in the application after scanning. Send the e-mail message or
perform OCR conversion. (The scanned image will not be displayed if you have not
installed the applications on the Color imageCLASS MF8100 Series Setup CD-ROM or
if you have not set the [Link Scanned Images to] setting.)
When the applications in the MF8100 Series Setup CD-ROM are installed, they will be
registered in the MF Toolbox buttons.
[OCR]ScanSoft OmniPage
[PDF]Presto! PageManager
NOTE
If white lines appear on one edge of the scanned image, check that the document is
1
correctly placed on the platen glass. A document should be placed approximately / " (3
8
mm) from the front edge (i.e., the edge closest to the operation panel) of the platen glass.
3-9
Scanning with the MF Toolbox