Scanning; Scanning With [B&W Start] Or [Color Start] On The Machine - Canon Color imageCLASS MF8170c Software Manual

Scanning

This chapter explains the procedure to scan documents to your computer.
IMPORTANT
For better scanning quality for color documents, we recommend that you place
documents on the platen glass. If you use the ADF, the scanned image might not be
clear.
Scanning with [B&W Start] or [Color Start] on the Machine
By pressing [SCAN] ➞ [B&W Start] or [Color Start] on the operation panel of the
machine, you can scan documents to your computer.
Pressing [SCAN] ➞ [Color Start] has the same effect as clicking [Save] in the MF
Toolbox.
Pressing [SCAN] ➞ [B&W Start] has the same effect as clicking [OCR] in the MF
Toolbox.
You can change the settings for [Save], or set up a button other than [Save] to
perform the same operation. (See "Setting the Scanning Function for [B&W Start]
or [Color Start]," on p. 3-3.)
NOTE
You can use the machine for only a local scanner (connected directly to your computer).
1
Place the document face-down on the platen glass or load it
face-up in the ADF.
Scanning with [B&W Start] or [Color Start] on the Machine
3
CHAPTER
3-1