Canon imageCLASS D760 Setup Instructions page 7

PARALLEL CABLE
Windows XP
A
Make sure the computer is turned off.
Make sure the power cord of the machine is plugged into the power outlet and the machine
B
is connected to your computer using parallel cable.
Turn on the computer. Start up Windows XP. PLUG and PLAY will activate and the FOUND
C
NEW HARDWARE WIZARD dialog box appears. Click CANCEL. For installations, using
PLUG and PLAY function of your computer, -----> Printer Guide.
D
Set the CD-ROM into the CD-ROM drive of your computer.
E
Click Canon
PC1200/iC D700
INSTALL button.
ADD PRINTER
WIZARD dialog box
appears. Click NEXT.
G
Check on the use
following port: Select
the printer port, the
machine is connected
to (usually LPT1:
Recommended printer
port), then click NEXT.
Add Printer Wizard
dialog box
(Manufacturers/
Printers selection)
appears.
I
Use BROWSE...
to select the directory
3
that contains the
CAPT.
1
For example, if your
CD-ROM drive is drive
D:, browse to
D:/English/WinXP,
click OPEN.
Make sure the folder is
selected in the COPY
2
MANUFACTURER'S
FILES FROM box,
then click OK.
*If there already are other printer drivers installed on your computer,
F
Select LOCAL
PRINTER ATTACHED
TO THIS COMPUTER,
then click NEXT.
Printer port selection
dialog box appears.
AUTOMATICALLY
DETECT AND
INSTALL MY PLUG
AND PLAY PRINTER
is not recommended.
H
Click
HAVE DISK...in the
MANUFACTURERS/
PRINTERS dialog box.
THE INSTALL FROM
DISK dialog box
appears.
J
Driver file selection
dialog appears.
Click NEXT.
Add Printer Wizard
dialog box
(Printer name)
appears.
K
Click NEXT.
If you wish to change
printer name, type a
new name into the text
box.
*If you want to set this
printer as the default
printer, select YES.
this option may not be displayed.