Operation Panel - Canon imageCLASS D320 Basic Manual

Operation Panel

This section describes keys used when making copies and setting the Additional Functions.
4 (–) , e (+) keys
Scroll through the selections so you can see other settings.
1-6
Enlarge/Reduce key
Sets an enlargement or reduction ratio of the copy.
Exposure key
Adjusts the copy exposure.
Set key
Determines the contents you set or
register. Also, if the document being
scanned stops in the ADF, pressing
this key makes the document come
out automatically.
Enlarge /
Reduce Exposure Image Quality
Status
Additional Collate /
Functions 2 on 1 Monitor
Status Monitor key
Checks the status of print,
copy and report jobs.
Collate/2 on 1 key
Sorts copies in order of pages or reduces 2
letter-size documents to fit on a
single letter-size sheet.
Additional Functions key
Customizes the way your machine operates.
Image Quality key
Adjusts the quality of copy image.
Memory/Alarm indicator
Lights green during copying or when the
copy job is stored in memory and flashes
red when the machine has a problem
such as a paper jam. (The error message
is displayed in the LCD.)
Energy Saver key
Sets or cancels the energy saver
mode manually. The key lights green
when the energy saver mode is set,
and goes off when the mode is canceled.
Memory Alarm
Numeric keys
Enter copy quantity and other
numerical values.
Energy Saver
Stop/Reset
Start
Start key
Starts copying.
Stop/Reset key
Cancels copying and other
operations, and returns the
machine to standby mode.
Also, this key is used to confirm
the copy job you reserved.