After Use; En8 - Panasonic SR-TEM181 Operating Instructions Manual

SR-TEM180_100_08.pdf 1 07/10/2020

After Use

Be sure to unplug and carry out these operations when the appliance is cooled down.
Do not use cleaning objects such as benzine, thinner, cleansing powder or metal scrubbers.
Parts need to be cleaned after every use.
Inner Lid
Clean after every use.
Removal
Hold and pull off the Inner Lid to remove
in the direction of the arrow.
Should be cleaned with sponge. (Do not use
abrasive cleaners or steel wool.)
Install
Slide the Inner Lid onto the Inner Lid Holder Shaft.
Face the large rubber lip of the Inner Lid Packing
towards the Outer Lid.
The small side of the Inner Lid Packing should
face you when the Outer Lid is open.
Body / Outer Lid
Wipe with a damp cloth.
Do not use a dishwashing
detergent.
Inner Pan
Wash with a diluted
dishwashing detergent and
sponge and wipe off the
external surface of the
Inner Pan.
Cast Heater /
Temperature Sensor
If an object has stuck on the
Cast Heater and Temperature
Sensor, lightly polish it off using
# 600) / steel wool. Then wipe
with a damp cloth.
Accessories
160
120
80
40
Wash with sponge and diluted dishwashing detergent after use.

EN8

10:28
Dew Collector
(of about
Remove and clean after
every use.
Empty the Dew Collector.
Steam Cap
Clean after every use.
How to remove and clean
1. Pull off the Steam Cap to
remove it as shown in the
2. Remove the Valve
Holder by turning it
counterclockwise.
Wash and wipe with
a damp cloth.
Do not remove the Rubber
Gasket and Valve Packing.
Rubber Gasket
Valve Packing
3. Wipe the inside of the
and Outer Lid plate with a damp cloth.
Please wipe it whenever you use it.
Please do not remove the Steam
Cap when the appliance is in use.
How to assemble the
Steam Cap
Fit the projection on the Steam Cap
1
into the hollow of the Valve Holder.
Turn the Valve Holder to the right
2
until it clicks.