Outdoor Use; Before Use; After Use - PowerTec R2103 Manual

OUTDOOR USE

• Connect the tool via a fault current (FI) circuit breaker with a triggering current of
30 mA maximum

BEFORE USE

• Before using the tool for the first time, it is recommended to receive practical
information
• Always check that the supply voltage is the same as the voltage indicated on the
nameplate of the tool (tools with a rating of 230V or 240V can also be connected to
a 220V supply)
• Use suitable detectors to find hidden utility lines or call the local utility
company for assistance(contact with electric lines can lead to fire or electrical
shock; damaging a gas line can result in an explosion; penetrating a water pipe
will cause property damage or an electrical shock)
• Do not work materials containing asbestos (asbestos is considered carcinogenic)
• Dust from material such as paint containing lead, some wood species, minerals
and metal may be harmful (contact with or inhalation of the dust may cause allergic
reactions and/or respiratory diseases to the operator or bystanders); wear a dust
mask and work with a dust extraction device when connectable
• Certain kinds of dust are classified as carcinogenic (such as oak and beech dust)
especially in conjunction with additives for wood conditioning; wear a dust mask
and work with a dust extraction device when connectable
• Follow the dust-related national requirements for the materials you want to work with
• Do not clamp the tool in a vice
• Use completely unrolled and safe extension cords with a capacity of 16 Amps
(U.K. 13 Amps)

AFTER USE

• After switching off the tool, never stop the rotation of the accessory by a lateral
force applied against it
USE
Blade Installation and Replacement
Turn the Tension Handle A clockwise to release Blade tension
Set the blade into both Guide Bearings J, making sure the Blade is centered on them
Hold the blade on the guides and push in. Make sure the blade evenly fits around
the wheels.
08